안녕하세요.
최근들어 시스코 장비로 L2 Switch 를 많이 셋팅하고 있습니다.
그러다보니 평소에 사용하지않던 시스코 스위치를 관리하다보니 기초정보들이 많이 필요하더군요
저도 몇 몇 Show 명령어를 제외하고는 평소에 잘 사용하지 않았는데
알게된 Cisco Show Command 정보 혹은 어떤 명령어들이 있는지 공유드리니 함께 지식 나누길 바래요~
#show run linenum
= 설정 컨피그 라인 번호 확인
#show runnig-config interface f 0/1
= 해당 인터페이스 설정 확인
#show interface switchport
#show interface summary
#show interfaces status
= Port별 Vlan, Up/Down, Description 정보, 속도, 타입 정보 확인
#show interfaces stats
#show interface trunk
#show interface | include line protocol is | bit/sec
= Interface Speed 확인
#show interfaces counters errors
= Port Error Count 확인
#show interfaces status err-disabled
= Port Error 발생 확인
#show err-disabled detect
= Error 발생 값 확인
#show controller ethernet-controller
= 스위치에서 프레임 전송과 관련된 통계 확인 (하프듀플렉스로 설정되 있고 패킷 빠지면 확인)
#show ip interface brief
= Port IP, Up/Down 상태 확인
#show ip route
#show ip route static
#show ip protocol
#show version
#show env all
#show hardware
#show inventory
= 하드웨어 인벤토리 표시
#show inventory raw
= 전체 하드웨어 인벤토리 표시
#show power inline
#show cdp neighbors
= 인접 장비명, 해당 장비와 연결된 if, cdp홀드타임, 장비 기능, 모델명, 연결된 상대장비 인터페이스 확인
#show cdp neighbors detail
#show mac-address-table
#show flash:
#show buffer
= 버퍼 확인
#show ntp status
#show clock
= 현재시간 확인
#show ntp association
= 시간정보 제공하는 서버주소와 관련된 정보 확인
#show processes
= 어떤 프로세스가 실행중 인지 확인
#show process cpu
#show process cpu history
= 전체 cpu 사용기록 확인 (평균, 최대치 시간별로)
#show memory
#show users
= Telnet 접속 User 확인, * 표기는 본인
#show host
= 현재 설정되어 있는 호스트 이름과 IP주소의 매핑 확인
#show standby
#show standby brief
#debug spanning-tree event
#show spanning-tree (see spanning-tree status on a VLAN-by-VLAN basis)
#show spanning-tree vlan 10 (see detail spanning-tree information for VLAN 10)
#show spanning-tree summary (among other things, see if this is the root bridge)
#show spanning-tree blockedports (see which ports are in STP blocking status)
#show spanning-tree root (see which BID is root on a VLAN-by-VLAN basis)
#show spanning-tree inconsistentports
= 현재의 비일관 포트 확인
#show ip dhcp pool
= DHCP Pool 확인
#show ip dhcp binding
= DHCP binding 정보 확인
#show ip dhcp conflict
= DHCP IP 충돌 확인
#show ip dhcp server statics
= DHCP 서버 정보 확인
* 제가 기재해드린 부분이 잘못되었거나 혹은 비어있는 부분에 대해서 알고계신 내용이 있다면 댓글 혹은 쪽지로 언제든지 피드백 부탁드리겠습니다.
이상 Cisco Show(시스코 Show 명령어) Command 정보 공유 포스팅 마치겠습니다.
'IT > Network' 카테고리의 다른 글
[네트워크] Cisco 장비 초기화 방법! Cisco 2960 장비 초기화 (0) | 2023.09.22 |
---|---|
[네트워크] TCP/IP에 대한 개념 정리! 네트워크 기초 공부 (0) | 2023.07.06 |
[네트워크] VLAN 개념, 가상랜 설명 네트워크 기초 공부 (0) | 2023.07.05 |
[네트워크] OSI 7계층에 대한 개념 정리, 네트워크 기초 공부 (0) | 2023.07.05 |
[네트워크] Network SubnetMask 개념 | IP 서브넷 마스크 개념 (0) | 2023.07.04 |